WOGONG blog wiki read


目前使用两个账户 wogong38 -> 托管博客 chengzhen -> 折腾


  • region 美国东部(弗吉尼亚北部) us-east-1 美国标准 美国东部(弗吉尼亚) 美国西部(俄勒冈) us-west-2 俄勒冈州 美国西部(俄勒冈) 美国西部(加利福利亚北部) us-west-1 加利福利亚北部 美国西部(加利福尼亚北部) 欧洲(爱尔兰) eu-west-1 爱尔兰 欧洲(爱尔兰) 欧洲(法兰克福) eu-central-1 法兰克福 欧洲(法兰克福) 亚太地区(新加坡) ap-southeast-1 新加坡 亚太地区(新加坡) 亚太地区(东京) ap-northeast-1 东京 亚太地区(东京) 亚太地区(悉尼) ap-southeast-2 悉尼 亚太区域(悉尼) 南美洲(圣保罗) sa-east-1 圣保罗 南美洲(圣保罗) AWS GovCloud(美国) us-gov-west-1 GovCloud AWS GovCloud(美国)


定价 http://aws.amazon.com/cn/s3/pricing/

s3cmd `sudo pacman -S s3cmd

  • web hosting

    All of your css files have Content Type set to binary/octet-stream, you need to set it to text/css

Route 53

托管区域 前 25 个托管区域:每个托管区域每月 0.50 USD 上述数目之后:每个托管区域每月 0.10 USD

对于未满一个月的部分,上述托管区域月度价格不按比例收取。一旦设置完成,即对托管区域收费,费用将在下个月的第一天收取。为了方便测试,如果托管区域在创建后 12 小时内删除,则不收取费用;不过,该区域中的任何查询将按照以下费率计费。


    Usage: s3cmd [options] COMMAND [parameters]
    S3cmd is a tool for managing objects in Amazon S3 storage. It allows for
    making and removing "buckets" and uploading, downloading and removing
    "objects" from these buckets.
      -h, --help            show this help message and exit
      --configure           Invoke interactive (re)configuration tool. Optionally
                            use as '--configure s3://some-bucket' to test access
                            to a specific bucket instead of attempting to list
                            them all.
      -c FILE, --config=FILE
                            Config file name. Defaults to $HOME/.s3cfg
      --dump-config         Dump current configuration after parsing config files
                            and command line options and exit.
                            AWS Access Key
                            AWS Secret Key
      -n, --dry-run         Only show what should be uploaded or downloaded but
                            don't actually do it. May still perform S3 requests to
                            get bucket listings and other information though (only
                            for file transfer commands)
      -s, --ssl             Use HTTPS connection when communicating with S3.
      --no-ssl              Don't use HTTPS. (default)
      -e, --encrypt         Encrypt files before uploading to S3.
      --no-encrypt          Don't encrypt files.
      -f, --force           Force overwrite and other dangerous operations.
      --continue            Continue getting a partially downloaded file (only for
                            [get] command).
      --continue-put        Continue uploading partially uploaded files or
                            multipart upload parts.  Restarts/parts files that
                            don't have matching size and md5.  Skips files/parts
                            that do.  Note: md5sum checks are not always
                            sufficient to check (part) file equality.  Enable this
                            at your own risk.
                            UploadId for Multipart Upload, in case you want
                            continue an existing upload (equivalent to --continue-
                            put) and there are multiple partial uploads.  Use
                            s3cmd multipart [URI] to see what UploadIds are
                            associated with the given URI.
      --skip-existing       Skip over files that exist at the destination (only
                            for [get] and [sync] commands).
      -r, --recursive       Recursive upload, download or removal.
      --check-md5           Check MD5 sums when comparing files for [sync].
      --no-check-md5        Do not check MD5 sums when comparing files for [sync].
                            Only size will be compared. May significantly speed up
                            transfer but may also miss some changed files.
      -P, --acl-public      Store objects with ACL allowing read for anyone.
      --acl-private         Store objects with default ACL allowing access for you
                            Grant stated permission to a given amazon user.
                            Permission is one of: read, write, read_acp,
                            write_acp, full_control, all
                            Revoke stated permission for a given amazon user.
                            Permission is one of: read, write, read_acp, wr
                            ite_acp, full_control, all
      -D NUM, --restore-days=NUM
                            Number of days to keep restored file available (only
                            for 'restore' command).
      --delete-removed      Delete remote objects with no corresponding local file
      --no-delete-removed   Don't delete remote objects.
      --delete-after        Perform deletes after new uploads [sync]
      --delay-updates       Put all updated files into place at end [sync]
      --max-delete=NUM      Do not delete more than NUM files. [del] and [sync]
                            Additional destination for parallel uploads, in
                            addition to last arg.  May be repeated.
      --delete-after-fetch  Delete remote objects after fetching to local file
                            (only for [get] and [sync] commands).
      -p, --preserve        Preserve filesystem attributes (mode, ownership,
                            timestamps). Default for [sync] command.
      --no-preserve         Don't store FS attributes
      --exclude=GLOB        Filenames and paths matching GLOB will be excluded
                            from sync
      --exclude-from=FILE   Read --exclude GLOBs from FILE
      --rexclude=REGEXP     Filenames and paths matching REGEXP (regular
                            expression) will be excluded from sync
      --rexclude-from=FILE  Read --rexclude REGEXPs from FILE
      --include=GLOB        Filenames and paths matching GLOB will be included
                            even if previously excluded by one of
                            --(r)exclude(-from) patterns
      --include-from=FILE   Read --include GLOBs from FILE
      --rinclude=REGEXP     Same as --include but uses REGEXP (regular expression)
                            instead of GLOB
      --rinclude-from=FILE  Read --rinclude REGEXPs from FILE
      --ignore-failed-copy  Don't exit unsuccessfully because of missing keys
      --files-from=FILE     Read list of source-file names from FILE. Use - to
                            read from stdin.
      --region=REGION, --bucket-location=REGION
                            Region to create bucket in. As of now the regions are:
                            us-east-1, us-west-1, us-west-2, eu-west-1, eu-
                            central-1, ap-northeast-1, ap-southeast-1, ap-
                            southeast-2, sa-east-1
      --reduced-redundancy, --rr
                            Store object with 'Reduced redundancy'. Lower per-GB
                            price. [put, cp, mv]
      --no-reduced-redundancy, --no-rr
                            Store object without 'Reduced redundancy'. Higher per-
                            GB price. [put, cp, mv]
                            Target prefix for access logs (S3 URI) (for [cfmodify]
                            and [accesslog] commands)
      --no-access-logging   Disable access logging (for [cfmodify] and [accesslog]
                            Default MIME-type for stored objects. Application
                            default is binary/octet-stream.
      -M, --guess-mime-type
                            Guess MIME-type of files by their extension or mime
                            magic. Fall back to default MIME-Type as specified by
                            --default-mime-type option
      --no-guess-mime-type  Don't guess MIME-type and use the default type
      --no-mime-magic       Don't use mime magic when guessing MIME-type.
      -m MIME/TYPE, --mime-type=MIME/TYPE
                            Force MIME-type. Override both --default-mime-type and
                            Add a given HTTP header to the upload request. Can be
                            used multiple times. For instance set 'Expires' or
                            'Cache-Control' headers (or both) using this option.
      --remove-header=NAME  Remove a given HTTP header.  Can be used multiple
                            times.  For instance, remove 'Expires' or 'Cache-
                            Control' headers (or both) using this option. [modify]
                            Specifies that server-side encryption will be used
                            when putting objects. [put, sync, cp, modify]
      --encoding=ENCODING   Override autodetected terminal and filesystem encoding
                            (character set). Autodetected: UTF-8
                            Add encoding to these comma delimited extensions i.e.
                            (css,js,html) when uploading to S3 )
      --verbatim            Use the S3 name as given on the command line. No pre-
                            processing, encoding, etc. Use with caution!
      --disable-multipart   Disable multipart upload on files bigger than
                            Size of each chunk of a multipart upload. Files bigger
                            than SIZE are automatically uploaded as multithreaded-
                            multipart, smaller files are uploaded using the
                            traditional method. SIZE is in Mega-Bytes, default
                            chunk size is 15MB, minimum allowed chunk size is 5MB,
                            maximum is 5GB.
      --list-md5            Include MD5 sums in bucket listings (only for 'ls'
      -H, --human-readable-sizes
                            Print sizes in human readable form (eg 1kB instead of
                            Name of index-document (only for [ws-create] command)
                            Name of error-document (only for [ws-create] command)
                            Indicates when the expiration rule takes effect. (only
                            for [expire] command)
                            Indicates the number of days after object creation the
                            expiration rule takes effect. (only for [expire]
                            Identifying one or more objects with the prefix to
                            which the expiration rule applies. (only for [expire]
      --progress            Display progress meter (default on TTY).
      --no-progress         Don't display progress meter (default on non-TTY).
      --enable              Enable given CloudFront distribution (only for
                            [cfmodify] command)
      --disable             Enable given CloudFront distribution (only for
                            [cfmodify] command)
      --cf-invalidate       Invalidate the uploaded filed in CloudFront. Also see
                            [cfinval] command.
                            When using Custom Origin and S3 static website,
                            invalidate the default index file.
                            When using Custom Origin and S3 static website, don't
                            invalidate the path to the default index file.
      --cf-add-cname=CNAME  Add given CNAME to a CloudFront distribution (only for
                            [cfcreate] and [cfmodify] commands)
                            Remove given CNAME from a CloudFront distribution
                            (only for [cfmodify] command)
      --cf-comment=COMMENT  Set COMMENT for a given CloudFront distribution (only
                            for [cfcreate] and [cfmodify] commands)
                            Set the default root object to return when no object
                            is specified in the URL. Use a relative path, i.e.
                            default/index.html instead of /default/index.html or
                            s3://bucket/default/index.html (only for [cfcreate]
                            and [cfmodify] commands)
      -v, --verbose         Enable verbose output.
      -d, --debug           Enable debug output.
      --version             Show s3cmd version (1.5.2) and exit.
      -F, --follow-symlinks
                            Follow symbolic links as if they are regular files
      --cache-file=FILE     Cache FILE containing local source MD5 values
      -q, --quiet           Silence output on stdout
                            Path to SSL CA certificate FILE (instead of system
      --check-certificate   Check SSL certificate validity
                            Check SSL certificate validity
      --signature-v2        Use AWS Signature version 2 instead of newer signature
                            methods. Helpful for S3-like systems that don't have
                            AWS Signature v4 yet.
      Make bucket
          s3cmd mb s3://BUCKET
      Remove bucket
          s3cmd rb s3://BUCKET
      List objects or buckets
          s3cmd ls [s3://BUCKET[/PREFIX]]
      List all object in all buckets
          s3cmd la 
      Put file into bucket
          s3cmd put FILE [FILE...] s3://BUCKET[/PREFIX]
      Get file from bucket
          s3cmd get s3://BUCKET/OBJECT LOCAL_FILE
      Delete file from bucket
          s3cmd del s3://BUCKET/OBJECT
      Delete file from bucket (alias for del)
          s3cmd rm s3://BUCKET/OBJECT
      Restore file from Glacier storage
          s3cmd restore s3://BUCKET/OBJECT
      Synchronize a directory tree to S3 (checks files freshness using size and md5 checksum, unless overriden by options, see below)
          s3cmd sync LOCAL_DIR s3://BUCKET[/PREFIX] or s3://BUCKET[/PREFIX] LOCAL_DIR
      Disk usage by buckets
          s3cmd du [s3://BUCKET[/PREFIX]]
      Get various information about Buckets or Files
          s3cmd info s3://BUCKET[/OBJECT]
      Copy object
          s3cmd cp s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2]
      Modify object metadata
          s3cmd modify s3://BUCKET1/OBJECT
      Move object
          s3cmd mv s3://BUCKET1/OBJECT1 s3://BUCKET2[/OBJECT2]
      Modify Access control list for Bucket or Files
          s3cmd setacl s3://BUCKET[/OBJECT]
      Modify Bucket Policy
          s3cmd setpolicy FILE s3://BUCKET
      Delete Bucket Policy
          s3cmd delpolicy s3://BUCKET
      Show multipart uploads
          s3cmd multipart s3://BUCKET [Id]
      Abort a multipart upload
          s3cmd abortmp s3://BUCKET/OBJECT Id
      List parts of a multipart upload
          s3cmd listmp s3://BUCKET/OBJECT Id
      Enable/disable bucket access logging
          s3cmd accesslog s3://BUCKET
      Sign arbitrary string using the secret key
          s3cmd sign STRING-TO-SIGN
      Sign an S3 URL to provide limited public access with expiry
          s3cmd signurl s3://BUCKET/OBJECT <expiry_epoch|+expiry_offset>
      Fix invalid file names in a bucket
          s3cmd fixbucket s3://BUCKET[/PREFIX]
      Create Website from bucket
          s3cmd ws-create s3://BUCKET
      Delete Website
          s3cmd ws-delete s3://BUCKET
      Info about Website
          s3cmd ws-info s3://BUCKET
      Set or delete expiration rule for the bucket
          s3cmd expire s3://BUCKET
      Upload a lifecycle policy for the bucket
          s3cmd setlifecycle s3://BUCKET
      Remove a lifecycle policy for the bucket
          s3cmd dellifecycle s3://BUCKET
      List CloudFront distribution points
          s3cmd cflist 
      Display CloudFront distribution point parameters
          s3cmd cfinfo [cf://DIST_ID]
      Create CloudFront distribution point
          s3cmd cfcreate s3://BUCKET
      Delete CloudFront distribution point
          s3cmd cfdelete cf://DIST_ID
      Change CloudFront distribution point parameters
          s3cmd cfmodify cf://DIST_ID
      Display CloudFront invalidation request(s) status
          s3cmd cfinvalinfo cf://DIST_ID[/INVAL_ID]
    For more information, updates and news, visit the s3cmd website:
    Consider a donation if you have found s3cmd useful:

Published 2015-07-08 00:15:38 +0800
Updated 2015-07-12 19:00:23 +0000